3D Virtual Museum “Saint Antoine Church”

Must read

The US Army Funds Project for Ground Vehicle Navigation in GPS-denied Terrain

The U.S. Army Research Lab awarded the University of Central Florida a $4.5 million grant to develop a smart, computer vision-based navigation system for...

Ford Will Use Boston Dynamics Robots As Mobile Lidar To Map Car Assembly Plants

Ford is going to employ two of Boston Dynamics’ “Spot” robots, which are four-legged, dog-like walking robots that weigh roughly 70 lbs each, to...

ArcGIS Pro Book Updated for Version 2.8

The ArcGIS Pro book on the use of the ArcGIS Pro application developed by ESRI has been updated for the latest version 2.8. This fourth...

Cursir NAVAID Drones For Flight Inspections Of Navigation Aids

NAVAID Calibration Drone by Cursir helped to speed up the flight check of the landing system of the Ulyanovsk airport. Last year, by order of...
Mehmet ÜNALhttps://www.surveyhands.com/
Yıldız Teknik Üniversitesi Harita Mühendisliği bölümünden mezun oldu. Bimtaş bünyesinde 3 boyutlu CBS ve harita şefliği grubunda yersel, mobil ve hava lidar projelerinde harita mühendisi ve proje yürütücüsü olarak görev yaptı. Lidar ve fotogrametri konularında yurt dışı ve yurt içinde katıldığı eğitimlerle özel sektör içerisinde lazer tarayıcı ve insansız hava araçlarının satış, eğitim ve desteği konularında Paksoy Teknik Hizmetler firmasında görev yaptı. 2018 yılında kurmuş olduğu Surveyhands firması bünyesinde, lazer tarama, insansız hava araçları ile fotogrametri ve 3D relality capturing üzerine hizmet vermektedir.

Meetings in physical environments have been reduced to a minimum due to Covid 19 pandemic that caused hundreds of thousands of deaths all around the World. The ways we carry out our jobs have changed and, in this process, the use of digital data, especially digital twin data that are digital copies of the physical environment, has begun to increase.

Automatization of the processing of the data obtained and ability to access data 24/7 through cloud-mediation and to share them easily enable many industries to use these data easily with developing software and hardware technologies.

In digital twin production, “Reality capture”, which a method to transfer the physical environment to digital environment as a photorealistic point cloud or a model, is a technique with which we can transform the data obtained from the environment to 3-dimensional and meaningful visual data that can be used by different disciplines interactively.

To sum up briefly, several different methods are used in transferring the physical environment to digital media. These are;

Laser scanning: This is a non-contact method that digitalizes physical objects with the help of laser light.

Classical Photogrammetry: This is a method that enables the objects to be transferred to digital environment with the help of their photos taken from different points.

Digital Photogrammetry: This is a method that has become popular during the past few years and that produces the 3-dimensional digital model by processing the photographs taken from the same point with different angles using machine learning methods.  

In the present work that we completed for Saint Antoine Church, by using the 3-dimensional data, an engaging tour with walkthrough experience can be done in the environment. By transferring these data obtained to VR supported platforms, virtual tours with different scenarios in the environment are made possible.

In addition to this, measurements can be done online without a need for any additional program, and schematic and 2D floor plans can be produced.

Besides these, documents such as photographs-videos-pdf can easily be reached from the same environment through the smart labels added to the platform and the web traffic data of the environment of the platform can be accessed.

Besides these, documents such as photographs-videos-pdf can easily be reached from the same environment through the smart labels added to the platform and the web traffic data of the environment of the platform can be accessed.

In Architectural, Engineering and Construction industries, it enables the visual follow-up of the construction processes of buildings, the advance of a common language between the field and the office on photorealistic digital twin models taken from the field in complex construction processes and taking measurements easily when needed.  

Discover Saint Antoine Church with 3-Dimensional Virtual Tour

It is possible to produce 3-dimensional point cloud data, which are also to be integrated to BIM processes, easily.

Because they are transformed into 3-dimensional spaces with high visual quality, these interactive digital data can be used as a very efficient presentation material to display and present spaces.

Click here to see all the other 3-Dimensional Modeling works that we carried out as Surveyhands Engineering.

More articles

LEAVE A REPLY

Please enter your comment!
Please enter your name here

- Advertisement -

Latest article

The US Army Funds Project for Ground Vehicle Navigation in GPS-denied Terrain

The U.S. Army Research Lab awarded the University of Central Florida a $4.5 million grant to develop a smart, computer vision-based navigation system for...

Ford Will Use Boston Dynamics Robots As Mobile Lidar To Map Car Assembly Plants

Ford is going to employ two of Boston Dynamics’ “Spot” robots, which are four-legged, dog-like walking robots that weigh roughly 70 lbs each, to...

ArcGIS Pro Book Updated for Version 2.8

The ArcGIS Pro book on the use of the ArcGIS Pro application developed by ESRI has been updated for the latest version 2.8. This fourth...

Cursir NAVAID Drones For Flight Inspections Of Navigation Aids

NAVAID Calibration Drone by Cursir helped to speed up the flight check of the landing system of the Ulyanovsk airport. Last year, by order of...

5 Ways to Use GIS in Smart City Projects

The successful implementation of a smart city project requires the development of a digital system that can manage and visualise the geospatial data in...